View Single Post
Old 02-24-2013, 02:02 PM   #7 (permalink)
Dallaz
A True Z Fanatic
 
Dallaz's Avatar
 
Join Date: Jun 2011
Location: North Dallas
Posts: 1,272
Drives: 09MontereyBlu370z6MT
Rep Power: 16
Dallaz is a splendid one to beholdDallaz is a splendid one to beholdDallaz is a splendid one to beholdDallaz is a splendid one to beholdDallaz is a splendid one to beholdDallaz is a splendid one to beholdDallaz is a splendid one to behold
Default

I would get Z1's brake kit with new rotors all around. they give you the option on slotted or cross drilled & slotted rotors, pads, SS brake lines, and fluid. Thats if your going to change them out. Mine were warped just recently and I had new ones put on the front for more than the entire kit from Z1, I was just in a rush to get them.

They will need to be tossed out, bummer it's happened twice by 17,000 miles.

I'm very anal about it now that I've had to get them replaced, these things are s*** as far as warping goes, they warp on everyone, yes the sport brakes. If your doing any sort of hard braking or continuous braking that will get your rotors heated up, a piece of advice is to not have your foot on the brake pedal at stop signs/lights because the brake pad material transfers to the rotor when its hot enough and creates bumps from the build up of transferred material "warped" rotors.
__________________
AeroJacket Lip Kit | GTR switch | NISMO S-Knob | Blacked-Out-EVERYTHING| 5% Tint | Carbon Fangs/Upper Trim | VOSSEN CV3's | Painted Headlights | CF Diffuser


Last edited by Dallaz; 04-04-2013 at 03:02 PM.
Dallaz is offline   Reply With Quote