Quote:
Originally Posted by Osiris
good idea with the high speed fan...question (and maybe a silly one), did you have the bumper on or off when testing with the fan?
|
the bumper was on and this was with the stock bumper not the one I have now. as far as a pic of it think of a piece of paper. fold it 3 inches from the top, then fold it again 5 inches from the first fold, hold it up and you should have a U shape. (not exact numbers just an example) take it and slide it up the front side of the crash bar and this is where you are going to attach it. the back is just free. the sides are left open to allow air to be sucked in when needed. Place it so the bottom covers the bottom of the first filter this is where I assume the problem is because it gets the most direct air flow. the top of the filters do not need to be covered since they have the plastic tops that will deflect any direct air. as long as the bottom covers the bottom of the filters it will work. Once I take the bumper off in the next couple of weeks I will post a pic.