Quote:
Originally Posted by Triple's
1. Push the ignition switch to the ON position.
2. Close the door.
3. Open the window completely by operating
the power window switch.
4. Pull the power window switch and hold it to
close the window, and then hold the switch
more than 3 seconds after the window is
closed completely.
5. Release the power window switch. Operate
the window by the automatic function to
confirm the initialization is complete.
6. Perform steps 2 through 5 above for other
windows.
|
Thanks, I did a little searching and found it right before you post. Everything is all good now.
Good job Kabestro. I'll have to do the same with my AEM intake. I wanted to get baseline but car was out of commission when I had the chance.