Quote:
Originally Posted by pfdaxe
Actually, that plug looks like it's the "output" from the Bose amp. NOT the plug from the HU to the amp. You want to use the input wires on the other plug on the amp (should be connector M84 according the FSM for mine which is an '09).
I'm about to replace my fronts with Polk components (wanted cleaner highs) and will be using the low level Front + & - before the amp. Also, I won't be tapping the wires, rather cut them and solder/heat shrink the connections. I'm hoping that works as right now I have my sub/amp connected to the sub output wires going to the LOC and will need a full signal for the entire system.
.
.
|
B41 is the connector from the HU to the Amp
Last edited by Mitco39; 02-08-2013 at 10:23 AM.
Reason: Was wrong.
|