Nissan 370Z Forum - View Single Post

kenchan · 09-23-2009, 09:31 PM

Thanks guys. Yah, the install was pretty easy.

I had to trim the harness cover by about 1", no biggie.

The non-dimming mirror was kinda tricky to remove but if you pry off the plastic cover you'll see where the tab is holding the wedge mount. I used my long nose plier to pull the tab up while sliding the mirror off the mount. Was kinda scared I was going to crack the glass if I used too much force with just the screw driver going at that tab.

I need to calibrate it and program the homelink still, but it works.

Want to thank everyone who supported with the links and the pict of the fuse junction harnesses to tap into.

09-23-2009, 09:31 PM	#41 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	Thanks guys. Yah, the install was pretty easy. I had to trim the harness cover by about 1", no biggie. The non-dimming mirror was kinda tricky to remove but if you pry off the plastic cover you'll see where the tab is holding the wedge mount. I used my long nose plier to pull the tab up while sliding the mirror off the mount. Was kinda scared I was going to crack the glass if I used too much force with just the screw driver going at that tab. I need to calibrate it and program the homelink still, but it works. Want to thank everyone who supported with the links and the pict of the fuse junction harnesses to tap into. Last edited by kenchan; 09-23-2009 at 11:51 PM.