Quote:
Originally Posted by pfdaxe
Mr Sparky:
Could you explain why you would need to connect to both left & right inputs on the LC2i? Your running a mono amp, so wouldn't all you need to do is connect to the left side of the LC2i? Am I missing something in the above description  |
I guess if your amp has a left and right input then to get a left and right output of the LC2i you have to feed it a left and right signal. As the bose sub only has a mono feed then bridging it to both is how this is achieved. It was just a question I asked and that was his answer so I went with it! Obviously your feeding both channels with the same signal and it gets summed in the amp but my amp manual said it would have low output if you didn't feed both left and right inputs.That's why I asked him how to do this and his answer is above, so I went with it. Hope that makes sense!
Matt will probably jump in here at some point and correct me I'm sure.
Edit: His comment above should read" you could y out either at the speaker level output from your
BOSE amp or at the ..................