View Single Post
Old 01-09-2013, 05:39 PM   #205 (permalink)
GaleForce
A True Z Fanatic
 
GaleForce's Avatar
 
Join Date: Aug 2011
Location: Ontario, Canada
Posts: 21,749
Drives: Varis Arising II
Rep Power: 51865
GaleForce has a reputation beyond reputeGaleForce has a reputation beyond reputeGaleForce has a reputation beyond reputeGaleForce has a reputation beyond reputeGaleForce has a reputation beyond reputeGaleForce has a reputation beyond reputeGaleForce has a reputation beyond reputeGaleForce has a reputation beyond reputeGaleForce has a reputation beyond reputeGaleForce has a reputation beyond reputeGaleForce has a reputation beyond repute
Default

Quote:
Originally Posted by Boosted Performance View Post
This is the "hard part" of the install if you want to call it that. Room being the main factor.


However, you should not have to pull the turbo. If you loosen up the T-bolt clamps you can just roate the couplers and the two pipes till they are seated well. With the new couplers the friction is high, and they are stiff, so you have to muscle them on. Some engine oil takes care of this though. I know there is not much room to really put your hands in there. Removing the passenger side wheel will get you some extra room to get your hands in and turn/adjust things. Sounds like the first pipe from the turbo needs to go in a bit deeper in to the reducer coupler on the compressor. The 45* silicone reducer also needs to be slid all the way on to the compressor outlet.
That's what I'm going to try. I pulled the turbo a couple of nights ago, pulled the pipe, double checked the coupler positions, put the pipe back in and got it situated nicely. Everything was good until I put the turbo back in. I'm going to do my best to muscle it tonight. I got side tracked this afternoon making brackets.

Honestly, the installation is very easy and the instructions are good. Like Sasha said before, if you can install HFC's then you can install this kit.
__________________
GaleForce is offline   Reply With Quote