It is installed. I took it for a drive now 1/3 traffic and 2/3 open road at 55 ambient temps. First pic startup after 10 rest
ImageUploadedByTapatalk1356986405.880213.jpg
Second pic after 5 min never going above 2500 rpm
ImageUploadedByTapatalk1356986449.597634.jpg
Third pic after fifteen minutes with some highway driving under 2500
ImageUploadedByTapatalk1356986534.131099.jpg
Another four minutes (19 total)
ImageUploadedByTapatalk1356986564.697532.jpg
Then I pounded it for about ten minutes
ImageUploadedByTapatalk1356986613.014318.jpg
It seems that once the needle starts climbing after 15 minutes or so it continues to move up at a much greater pace but stops at the last pic. Your lowest needle mark is 140F?