View Single Post
Old 12-28-2012, 12:43 PM   #412 (permalink)
Huan'z
Track Member
 
Huan'z's Avatar
 
Join Date: Apr 2010
Location: houston,texas
Posts: 641
Drives: black 370z 7/AT.
Rep Power: 16
Huan'z is on a distinguished road
Wink

Quote:
Originally Posted by Wiggins3377 View Post
Yeah, make sure you clean any area that will touch the double sided tape well before applying the promotor, then apply the promotor to that same area. You'll need a few packets of it for everything you’ll be installing. Id grab 10 or so just to be safe. You'll also want to test fit the pieces well before applying anything, cause once you use the promotor its near impossible to remove the pieces. I had alot of trouble installing my rear spats simply because of the flex in the bumper. Id suggest taking the whole rear bumper off to install the diffuser. It makes the whole process a lot easier. I’ll post a pic of what I did. As far as paint, id suggest painting the whole thing first, that’s what I did and it turned out fine.



I have the same carbon signal lip and had heard about gap issues as well, however I had mine professional molded to the front bumper. That said I wasn’t made aware of any fitment issues.

Good job buddy!! I will do what u said. Will post picture when everything in place! Thanks a lot! Where can I get the promoter? Home Depot? Thanks a lot!!
Huan'z is offline   Reply With Quote