Quote:
Originally Posted by gurneyeagle
Here's some pictures from today's project. The reason I even did this was because the spoiler was struck by a large rock which cartwheeled up the spoiler (bad marring and scratching) before striking one of the grille blades and making a nasty divot; and it was covered with clear bra.
I started off with some super-thin 3M vinyl tape to define the edges, them followed-up with some blue painter's tape, and finally newspaper.
I laid down a mist coat first, followed-up be four progressively heavier coats. The finish came out great and the rock chips are filled in and not noticeable. Once I clean up the edges in a few days, it will be finished.
|
looks good, and the touch up should be easy!