Nissan 370Z Forum - View Single Post

elliotty · 11-14-2012, 11:30 AM

I have decided to go another route with my monitoring setup, so I will be removing the PLX Devices setup I currently run. All parts are still on the car, but can be removed very quickly. Everything is in great shape, works, and has only been used for about 9 months (less than 5k miles). All asking prices are SHIPPED within the continental US. I will consider shipping elsewhere for additional. If you are local (Northern VA) and would like to pickup, I am happy to adjust the price.

If you have any questions at all, please do not hesitate to PM me.

Asking $450+PayPal Fees as a package, or priced individually below.

The parts:

PLX DM-100 OBD-II 52mm Gauge

PLX DM-100 | OBD2 OBDII Scan Gauge

I usually use this to monitor 4 parameters at once, usually Boost, Oil Pressure, AFR, and Intake Temperature. Reference the PLX website for the complete list of functions (there are a ton).

Paid $210+shipping, asking $175

PLX Wide Band AFR Module

PLX SM-AFR | Wideband UEGO Air Fuel Sensor

Not too much explanation needed here. It heats up quickly and gives a reading soon after the car starts. I don't have pictures of the module installed on my car, but it looks just like the one on the website.

Paid $150+shipping, asking $115

PLX Vacuum/Boost Module

PLX SM-Vac/Boost | Vacuum Boost Sensor

Not too much to explain here either. My only complaint with this one is that it is only capable of displaying vacuum OR boost on the screen (which PLX does not advertise). It didn't bother me, as my boost controller will show vacuum, so I had the PLX display boost only.

Paid $100+shipping, asking $75

PLX Fluid Pressure Sensor

PLX SM-FP | Oil Pressure Sensor

I used this to monitor Oil Pressure. It comes with one sensor, but the module has inputs for two sensors, so you could run a second sensor later on.

Paid $130+shipping, asking $100

PLX 2-1/16" Gauge Mount

http://www.plxdevices.com/product_in...id=ACCE52GRING

Self explanatory. You can see how I used this in the first picture above.

Paid $10+shipping, will include free with DM-100

Additionally, I purchased some extra long stereo headphone cables to connect the sensor modules in a closed loop. This allows you to display OBD-II parameters along with the sensor module parameters at once on the 4 Parameter Display. I will throw those in if someone buys the whole package.

Thanks for looking!

11-14-2012, 11:30 AM	#1 (permalink)
elliotty Enthusiast Member Join Date: Sep 2010 Location: Charlotte, NC Posts: 355 Drives: '10 PG Nismo TT Rep Power: 15	PLX Complete Gauge Setup I have decided to go another route with my monitoring setup, so I will be removing the PLX Devices setup I currently run. All parts are still on the car, but can be removed very quickly. Everything is in great shape, works, and has only been used for about 9 months (less than 5k miles). All asking prices are SHIPPED within the continental US. I will consider shipping elsewhere for additional. If you are local (Northern VA) and would like to pickup, I am happy to adjust the price. If you have any questions at all, please do not hesitate to PM me. Asking $450+PayPal Fees as a package, or priced individually below. The parts: PLX DM-100 OBD-II 52mm Gauge PLX DM-100 \| OBD2 OBDII Scan Gauge I usually use this to monitor 4 parameters at once, usually Boost, Oil Pressure, AFR, and Intake Temperature. Reference the PLX website for the complete list of functions (there are a ton). Paid $210+shipping, asking $175 PLX Wide Band AFR Module PLX SM-AFR \| Wideband UEGO Air Fuel Sensor Not too much explanation needed here. It heats up quickly and gives a reading soon after the car starts. I don't have pictures of the module installed on my car, but it looks just like the one on the website. Paid $150+shipping, asking $115 PLX Vacuum/Boost Module PLX SM-Vac/Boost \| Vacuum Boost Sensor Not too much to explain here either. My only complaint with this one is that it is only capable of displaying vacuum OR boost on the screen (which PLX does not advertise). It didn't bother me, as my boost controller will show vacuum, so I had the PLX display boost only. Paid $100+shipping, asking $75 PLX Fluid Pressure Sensor PLX SM-FP \| Oil Pressure Sensor I used this to monitor Oil Pressure. It comes with one sensor, but the module has inputs for two sensors, so you could run a second sensor later on. Paid $130+shipping, asking $100 PLX 2-1/16" Gauge Mount http://www.plxdevices.com/product_in...id=ACCE52GRING Self explanatory. You can see how I used this in the first picture above. Paid $10+shipping, will include free with DM-100 Additionally, I purchased some extra long stereo headphone cables to connect the sensor modules in a closed loop. This allows you to display OBD-II parameters along with the sensor module parameters at once on the 4 Parameter Display. I will throw those in if someone buys the whole package. Thanks for looking!