Nissan 370Z Forum - View Single Post

DR_ · 11-14-2012, 11:15 AM

I use the small Harbor Freight jack and it often goes on sale for $59.
I use square wood blocks on the jack spots on the pinch welds.
I lift one side at a time by the front side jack point as it lifts both side wheels. I put the front wheels on Rhino Ramps and the rear on aluminum stands.
If I want to take all four wheels off at a time I put the jack under engine jack point and raise and replace the Rhino Ramps with aluminum stands.

11-14-2012, 11:15 AM	#2 (permalink)
DR_ Track Member Join Date: Jul 2009 Location: Dallas Posts: 981 Drives: Touring/Sport M6 PG Rep Power: 17	I use the small Harbor Freight jack and it often goes on sale for $59. I use square wood blocks on the jack spots on the pinch welds. I lift one side at a time by the front side jack point as it lifts both side wheels. I put the front wheels on Rhino Ramps and the rear on aluminum stands. If I want to take all four wheels off at a time I put the jack under engine jack point and raise and replace the Rhino Ramps with aluminum stands.