View Single Post
Old 10-31-2012, 08:13 PM   #250 (permalink)
Nissanboy
Enthusiast Member
 
Nissanboy's Avatar
 
Join Date: Dec 2010
Location: H-Town
Posts: 378
Drives: Too slow
Rep Power: 14
Nissanboy is on a distinguished road
Default

Quote:
Originally Posted by Jordo! View Post
A site that shall remain nameless under pain of excommunication around here...

google VVEL and 370Z in images and it will pop up on the first page

EDIT: Whoops -- it just links back to another thread on here. I'll shoot you a PM.


I'm guessing because of the same factors that result in other tuning limits -- gas mileage and emissions. I find it hard to believe there's no wiggle room left.

Even with ignition timing, where there is not much room for advance, a couple of extra degrees can be safely dialed in, and that nets in reasonable power gains.

I find it hard to believe the valve timing is optimized for power and any other changes result in valves hitting the pistons or power loss. If the tolerances were THAT tight, it means that with just a little valve float at high revs, you'd see mushroomed valves occurring here and there, and I haven't heard of a single failure like that, even though most people bump up the rev limit by a few hundred RPM and plenty of people beat on the car.

Moreover, even if timing and overlap is optimized when stock, slap on a free flowing exhaust, different IM or set of headers and its (potentially) a different ball game.
I agree but one thing that people seem to misunderstand around here is just because something is used to provide better emissions and gas mileage doesn't mean it has been made only for that. Think about it; if the hydrocarbons in the air-fuel mixture is burned better or more complete, it will give us better gas mileage, emissions AND power. Just simply increasing the efficiency of the motor.
Nissanboy is offline   Reply With Quote