View Single Post
Old 10-27-2012, 01:51 PM   #37 (permalink)
Diabel
Base Member
 
Join Date: Sep 2012
Location: Bensenville IL
Posts: 103
Drives: 370z
Rep Power: 13
Diabel is on a distinguished road
Default

Quote:
Originally Posted by JC671 View Post
My clutch ain't slipping at all and right now in spraying a 100 shot and have been doing so for awhile.

How many miles on your car? Your clutch made just need to be changed already if you have a lot of miles. My car only has 8K miles and its holding fine. Now trying to put that power to the ground here is another story but I'm rectifying that issue here shortly :-)

Fuel pump can handle it btw. I spray with the TPS and mine sprays at 3K. You should not spray at anything lower.
My Z has 6k miles, the clutch is slipping even without a nitrous, 2-3 hard starts from stop and that's it, it gets hot and slips. Good to hear that stock engine is ok with such a torque gain during 100 shot. I spray 75 at 2800, but have that managed via Progression Controller, so the shot is build from 50%-100% within 2800-3800 RPM ofcourse only with wide open throttle which is monitored directly by Controller.

You wrote that fuel pump handles it - just to be sure, did you check the AFR ? What is the AFR value during your 100 shot?

I had some troubles with proper AFR corection for 75 shot on the dyno because the ECU automatically pushed the throttle after shot, so I had to test it directly on the streets.
Diabel is offline   Reply With Quote