Nissan 370Z Forum - View Single Post - Announcing the release of the STILLEN race oil cooler

ResIpsa · 09-12-2009, 02:31 PM

I have the answer regarding exchanging the Stillen sandwich plate with a Mocal thermostatic one. The supplied stillen fittings will not work. You need to get two 90 degree 1/2 BSP to 8 AN fitting and two Mocal bonded washers. The total cost is around $110.

This will allow the Mocal unit to replace the Stillen unit exactly.

If this all sounds like another language you can call BatInc. and they will assist you in getting the right parts.

My thermostatic sandwich plate and my Stillen track cooler are currently in transit. I will update with the performance of this setup when everything is installed.

I am hoping that temps will barely go north of 190 degrees on the street and 220 on the track.

09-12-2009, 02:31 PM	#43 (permalink)
ResIpsa Track Member Join Date: Apr 2009 Location: Virginia Posts: 564 Drives: 09 RACING HEN Rep Power: 338	Mocal Thermostatic Sandwich Plate I have the answer regarding exchanging the Stillen sandwich plate with a Mocal thermostatic one. The supplied stillen fittings will not work. You need to get two 90 degree 1/2 BSP to 8 AN fitting and two Mocal bonded washers. The total cost is around $110. This will allow the Mocal unit to replace the Stillen unit exactly. If this all sounds like another language you can call BatInc. and they will assist you in getting the right parts. My thermostatic sandwich plate and my Stillen track cooler are currently in transit. I will update with the performance of this setup when everything is installed. I am hoping that temps will barely go north of 190 degrees on the street and 220 on the track. __________________ The Reed Law Firm; Michael Fasano VA Attorney and Counselor at Law: A Virginia Traffic, Criminal, and Family Lawyer.https://reedlawva.com/