Quote:
Originally Posted by JB1
Ah, I get it, the bracket is too small, making the cooler sit too low. Thanks again for the feedback!
|
Your welcome. If someone where to replicate how I mounted the oil cooler I seriously doubt it would take over an hour to do it once the car is jacked up, the front and dust cover removed.
Just drain the oil, remove the filter, drill a 1.5 inch hole, run the lines through, connect the filter adapter, connect the lines, snap on the bolt clips, put the bracket on the radiator, connect the lines to the oil radiator, bolt the radiator in place, neaten everything up drilling one hole for the clamps and a few plastic ties. Your done.
Pretty damn simple after you've done one and no way in the world would you need to spend more money as your not going to get anything that works better or is easier to do.