Quote:
Originally Posted by flashgordon
I bought a Stillen GEN3, do you think that it's needed to adjust K fuel multiplier?
I seen in logs that BFS in 0-60mph before of GEN3 reached 20.72, and now is 18.8!
AFR it's perfect after 2 e-tune maps.
Now my MAF is stock and K=26806
Thanks
|
read what PunKidd wrote about K-fuel & Maf Table
My opinion is at your point , I would leave it ,,
im pretty sure the stillen gen3 is slightly bigger since you read a lower BFS than the oem intake box but you are still with the stock throttle body ,, its not as severe as the setup I had.