Nissan 370Z Forum - View Single Post

pulser8 · 10-03-2012, 11:28 AM

I had my car inspected two days ago and after I picked it up the check engine light came on. I have FI CBE, HFC, and K&N drop ins. These mods were installed over three months ago and I've driven roughly 6K miles without the engine code. Any ideas? I would think that an exhaust leak would have triggered the code long ago. During the installation process, I had to remove the passenger side header to remove one of the stock cats. It was tightened to spec however during reinstallation and a new gasket was used. I did notice that the car has seemed intermittently sluggish with acceleration for the last few weeks.

Any suggestions would be appreciated. Should I be driving the car?

10-03-2012, 11:28 AM	#1 (permalink)
pulser8 Base Member Join Date: Nov 2010 Location: Virginia Posts: 18 Drives: 2010 370z 40th Rep Power: 15	Check Engine Code P2A00 I had my car inspected two days ago and after I picked it up the check engine light came on. I have FI CBE, HFC, and K&N drop ins. These mods were installed over three months ago and I've driven roughly 6K miles without the engine code. Any ideas? I would think that an exhaust leak would have triggered the code long ago. During the installation process, I had to remove the passenger side header to remove one of the stock cats. It was tightened to spec however during reinstallation and a new gasket was used. I did notice that the car has seemed intermittently sluggish with acceleration for the last few weeks. Any suggestions would be appreciated. Should I be driving the car?