Nissan 370Z Forum - View Single Post

Shamu · 09-13-2012, 09:45 PM

I set them 30 psi front and 28 rear hot for ax. What are your alignment settings? a6s need lots of negative camber to work properly. At Least -2 but -3 is better. Do you have a little toe out up front?

If you don't have much camber more bar would help a little. But would focus on front. Be careful not to put too much ear bar on our cars.

I wouldn't worry about scrubbing them in on street. They will perform fine after your first run.

09-13-2012, 09:45 PM	#3 (permalink)
Shamu A True Z Fanatic Join Date: Jan 2011 Location: Nor Cal Posts: 1,059 Drives: 370Z Racecar Rep Power: 20	I set them 30 psi front and 28 rear hot for ax. What are your alignment settings? a6s need lots of negative camber to work properly. At Least -2 but -3 is better. Do you have a little toe out up front? If you don't have much camber more bar would help a little. But would focus on front. Be careful not to put too much ear bar on our cars. I wouldn't worry about scrubbing them in on street. They will perform fine after your first run. __________________ Grant Last edited by Shamu; 09-13-2012 at 09:48 PM.