View Single Post
Old 09-10-2012, 03:29 PM   #1356 (permalink)
ZForce
A True Z Fanatic
 
Join Date: Jul 2009
Location: Roseville, CA
Posts: 2,359
Drives: 09 370Z Tour + Sport
Rep Power: 21
ZForce has much to be proud ofZForce has much to be proud ofZForce has much to be proud ofZForce has much to be proud ofZForce has much to be proud ofZForce has much to be proud ofZForce has much to be proud ofZForce has much to be proud ofZForce has much to be proud of
Default

Quote:
Originally Posted by speedfreek View Post
Has anyone ran into an issue trying to remove the 19mm lower control arm bolt? I had no issue on the driver side but the passenger side will not release. I have soaked it in PB Blaster and I am using a breaker bar. The bolt is taking serious damage and probably going to replace it with a new shiny one once removed. I am almost to the point I am going to just cut it or break it to get it off. Thought I would see if there is something I am missing or not trying first.
Yup, on my first install of springs (this is the third, two for springs and one for shock) I had one that was frozen from when the car came off the assembly line. Heating it up, drilling, pretty much had to cut it off and rip it a part to get it off. If your Nissan dealer does not have one in stock, check with Infiniti....same parts. g/l it is a bugger.

If a good foot on a 19 mm wrench does not break it loose, then you are pretty much into thrashing mode.

Last edited by ZForce; 09-10-2012 at 03:32 PM. Reason: added last line
ZForce is offline   Reply With Quote