Thanks Man..I found your added instructions very helpful. Just a general comment to the thread...Everything was as the instructions suggested...The driver side crank case venting outlet takes the two 3" rubber tubing as a 90 degree setup..and that is a good fit. The instructions state to use the 7" tubing "as is" for the passenger side crank case vent. You just cannot install the 7" piece without a sever kink..As you stated it must be cut to size....Approximately 3" should do it...but measure first.
I immediately felt a difference in response and sound. A really good modification for the money and effort!!
__________________
2017 Pearl White GT-R Premium
|Full Bolt-On E85 From Speed by Design|
|