Quote:
Originally Posted by DCNISMO
Simple green, lots of rags, good gloves.....time and patience. I would never spray water or use a pressure hose in a modern engine bay with all the electronics. All it takes are a few drops in a connector or line or sensor and your screwed. I wipe mine down and detail it once a month...so it never gets all crudded up.
|
You should spend some time on the detailing sites. Modern engines are much better prepared to take water than older engines with distributor caps, points, etc. Water isn't going to hurt anything under the hood unless you have a short ram intake. I usually only cover the alternator.