Boosted,
I read in my Rx8 days some of the guys used the Boost-A-Pump to keep fuel temperatures under control. Do you think with such a big pump that this would be necessary? Below is a copy-pasta of the Boost-A-Pump info and link:
Boost-A-Pump
Quote:
|
A time tested and proven Kenne Bell innovation, the BOOST-A-PUMP™, powers some of the world’s most powerful production street and competition vehicles. The 800HP Shelby Super Snake, one of the World’s Fastest Production Sport Cars, the 242+mph 806HP Koenigsegg CCR, the dual turbo 1100HP Lingenfelter 427" Corvette 900HP Mr. Norm Dodge and 650-825HP RPO Camaros and, of course, all the legendary Kenne Bell kits can use the BOOST-A-PUMP™ to reliably produce those big HP numbers - on pump gas! It activates only at full throttle or boost, so it doesn’t “bloat” or “overload” the fuel system at idle or cruise where full time pumps and extra fuel are not required. So, the fuel isn’t heated (gasoline begins to boil at 87°). No “cool can” is necessary. And it’s much easier to install (cut one wire) and more reliable than fuel pumps. And since the BAP is also a voltage regulator (exclusive kb) it helps prevent engine damage from low voltage/ reduced pump flow during electrical overload or failure. It will attempt to stabilize the pump voltage and maintain sufficient fuel flow.
|
__________________
Mazda Rx8 MT Titanium - SOLD!
2009 370Z T-Sport MT Black - Takeda Intake, Swift springs, Rear Camber kit, SS B Lines, FI Exhaust, Z Speed CMAK Flywheel/Clutch Kit, Stillen Brake Cooling.
|