slynx

Great write up on the viper install. I'm currently trying to put in a viper 5904, but am having trouble with the wiring. Though I don't have the clutch bypass and RFID key bypass, when i clutch in and have the key, the starter cranks, but the engine doesn't start. This is my first alarm/rs install and your diagram has taken alot of the guesswork out. The ign 1 and starter wires on the 24 pin harness aren't connected, (thinking it was redundant to the 8 pin harness), so when I get a chance I'm going to connect those and see if that solves my problem.

EDIT: My 5904 has a 10 pin harness instead of 8 pin for the r/s. It has a Starter output and ignition 2 output that I've connected to relays to change their polarity according to the DBALL install manual. I'm going to have the same ("redundant") outputs on the 24 pin harness connected to these and see where it takes me.