a little photo i took when beginning the mockup install. as you can see i cut open the top/middle of the fuel tank so that we could see whats going on and also provide better photos for installation directions. even though you will not get as good of a perspective in your tank, this makes it easier for us to show you what you are working with inside there when i take more photos.
notice the corner of the baffle pointing at the level sensor... it has to be bent out of the way a little or the level sensor arm will contact it and then the fuel gauge would be unable to read full. i wanted to avoid having to do that, but mounting the level sensor on the outside diameter of the canister compared to how it hangs stock, left us very little room to play for giving the sensor full swing.
this unit is my personal one... the retail ones are anodized blue and not beat up.
Last edited by phunk; 08-22-2012 at 07:25 PM.
|