Quote:
Originally Posted by djrelic
A question through about the revised fork... I had the bolt behind the fork all the way down on the clutch rod and I put the form on in the kit... It says in the kit instructions that in the revised fork that the threads do not show through it... I know when I installed mine the threads come up about more than half way in the clutch fork. Is that normal? Everything is fine... Just wondering if I was being too gentle with it.
|
Yes, that sounds perfectly normal. The photo used in the install guide was of the original fork which had a much thinner threaded base then the new revised ones. So on the old ones the tip of the clutch rod would come right through and poke up. The Revised ones are more then twice as thick at the base of the fork so you will no longer see the tip of the clutch rod come through.
This was done to both lengthen the fork giving a better adjustment range for the friction point as well as having more active threads engaged to hold the fork.