Quote:
Originally Posted by djrelic
I just installed mine this afternoon.
I dont know maybe if I didnt tighten something down enough but the pedal at the very top is kind of sloppy with some play to it.. but once you depress it, it's smooth. Idk I gotta drive it around a bit more and see.
|
Djrelic, Yes it sounds like the upper switch needs to be adjusted down to take up the slack at the top of pedal stroke.
Unclip the return spring so that the pedal is resting right at the top of the master cylinder stroke. Adjust the switch down until the button is just depressed. Tigten the switch nuts and snap the reutn spring back into its keeper. The play at the top before starting to depress the MC rod should now be almost zero. (See Steps 41 & 43 of the Install Guide)
The 2 side bolts that lock the clutch rod angle adjustment also serve the secondary purpose of taking up the side to side play in the main shaft bearings. These need to be torqued a little at a time while checking the side-side play of the pedal arm. Tighten these down until the play is just gone but the pedal still moves freely (bearings not being pinched)
(See Step 39 and photos of the Install Guide.)
That should eliminate both issues you're seeing.
Cheers
Ryan@RJM Performance