Nissan 370Z Forum - View Single Post - DIY: GTR Red Start-Stop Button Swap out

Z-it-right · 08-11-2012, 10:10 AM

Writing this while doing install

Don't need a screw driver to get shift plate off. Just grasp ring with both hands and pull up sharply.

You don't need to disconnect the hazard wire, there is plenty of room to just leave it connected.

There are two screws to take out on each kick panel, not one on each.

Easy 10 minute install, thanks for the pics though.

08-11-2012, 10:10 AM	#279 (permalink)
Z-it-right Base Member Join Date: Jul 2012 Location: Goldsboro, NC Age: 42 Posts: 9 Drives: 12 370Z NISMO White Rep Power: 13	NISMO install Writing this while doing install Don't need a screw driver to get shift plate off. Just grasp ring with both hands and pull up sharply. You don't need to disconnect the hazard wire, there is plenty of room to just leave it connected. There are two screws to take out on each kick panel, not one on each. Easy 10 minute install, thanks for the pics though.