My splitters been on for about 6 months now, no warping. The screws Stillen supplies are useless. How can you use self tapping screws into something thats only a few millimeters thick? I used nuts, bolts, and large fender washers(2 per bolt) about 6 inches apart from eachother. Drill pilot holes and install through the bottom of the bumper with the front jacked up. There is a channel underneath to fit the bolts and washers (no need to remove the bumper). First few times after install checking the oil I accidentally stepped on the lip a few times. It's rock solid with no warping when installed this way.
Sent from my SPH-D710 using Tapatalk 2
|