I found this discussion between Jay and you. So this must mean you dont need a AC bracket made to replace the AC to delete it. Just another belt smaller belt, correct?
''Originally Posted by jayfightmoves
The AC delete is pretty easy. Once you snatch the compressor off replace the stock belt with a Gates K060500. This is a 6 rib belt rather than the stock 7, however it should be fine as it will have no compressor load. Lace the belt through the; power steering, alternator, tensioner and crank pulley normally. Then only use the upper most grooved pulley to complete the loop. We removed the AC side smooth idler and the center ribbed idler as they have no use in this configuration.''
|