pull your weather stripping back from the side that runs from the dash and the door run it threw there. and use a butter knife wrapped with tape and push the wire down in the crevice where the tweeter is and all but start from where the antenna is mounted and work down. Than after getting it to the edge where the glove box is look underneath and run it threw the loops down there and you can zip tie as well. Than run it the rest of the way to your head unit.
The wire for the mic same thing use a butter knife with tape and push it into the crease where the head liner and the a pillar meet than run it down to where the weather stripping is pull that back run it behind there and same for that all the way to the head unit.
I think my next install I am going to go step by step lol.
|