bbig- sorry to hear about Prince.
RIP
Quote:
Originally Posted by bbigby64
 That's cute. |
hahaha
Quote:
Originally Posted by GaleForce
Hi Mr.kenchan 
Today I found my cup-holder-thingy jammed into my mail box.  Good thing it's well packaged! It's very well made, much better than I was expecting. And my unit stands straight up
Yeah, I just said that! 
I just need to add a bit of foam or a cloth because the Zoom is too thin to fit securely, no biggie.
Thanks for the recommendation |
hi mr.gale.
sounds good that you got your cupholder thingie and stands straight.
you might want to try making a tripod mount for your zoom if you your zoom has a tripod mount hole?
for mine i just drilled 2 holes into the base and mounted a thin piece of metal with the tripod knob and e-clip on the other side so my knob doesn't fall off.
on the base, i added some 5mm thick weather seal stripping blocks on the bottom half of the part of the base extenders. this is to prevent the extenders from holding onto the painted cupholder ring on the Z. that part vibrated on my car in certain frequencies when the tascam was attached.
after pulling out the cupholder assembly i pulled apart the painted ring and put a piece of e-tape sandwiched between the painted trim clip part and the base plastic for a secure fit. you'll know wat i mean if you pull your cupholder assy out of the center console and see the passenger side of the ring. yours might not vibrate though with your zoom attached.