Quote:
Originally Posted by LMBmikeZ
the silicone will hold stronger then the double sided tape if you use the right stuff. also to get it off if you heat it with a heat gun (note must keep gun in motion to prevent over heating) the left over silicone will also peel off when heated up 
But if your willing to but the holes in the bumper then yes screw are your best bet |
Good to know about the heat gun, I didn't even think of that.
Quote:
Originally Posted by Mino
So the only thing you used was 3m?
|
I used 3M and Screws, and a little silicon but it got messy. Apparently none of that was good enough. It would slide down when I hit bumps, but I thought it was secure enough to not fly off. I was wrong
I need one that goes over the fangs also Mike, but it looks like the only options are Nismo S-Tune which is too bulky, and Top Secret like yours. I'm going to try this again, but this time bolt it down with nuts, 3M everywhere and silicone. Another $500 bucks down the drain.