First off I would like to start off by saying I was very disappointed with the AEM truboost. It did not/would not hold the boost as it was supposed to. This oppinion might change pending what their customer service says, but in the time I needed it to be clutch it just was not there.
Before talking about the results, i would like to point out just how linear the hp/tq curves are as this will be somewhat important.
The hp curve was so linear that peak hp was always towards the top of RPM. So to simulate running 9psi at the top, Greg and Sebz felt it was safe to raise the boost to 12psi in the low/mid range so when the boost tapered off at the higher RPM it would be right where we wanted. Keep in mind that the results simulated were with a drop in boost pressure, not a spike ect...
With that being said after talking to Sebz and Greg, they both felt that with a working boost controller holding steady at 9psi that the car would produce the same results. We will be putting this to the test once I get the EBC situation resolved and get more dyno time. Don't know how fast this will go as I am gone for half of July, but I will work as quickly as I can.
I would like to point out that I am not saying my car is running 9psi, clearly it's up to 12, just simply stating that peak hp was at 9psi and that hopefully in the near future we will not need to crank it to 12 for those results
Again, I would like to thank Gerg and Sebz for their awesome work! I learned a ton while you guys were here and I look forward to next year (if you guys can put up with the late nights
)
