Quote:
Originally Posted by Shotta
So you pried it off from the outside without collapsing and pushing on the tabs first on the inside? I might have to try your method after I collapse the tabs again. In my case it feels like someting else is holding up top other then the 2 tabs because I was pushing on both of them at the same time with enough force to fold the mirror housing forward but I achieved absolutely no seperation between the cover and the mirror housing.
I think I have the demon mirror cover.
|
Which side...driver/passenger?
I started from the bottom-inside corner on the exterior of the mirror cover. The corner enabled me to fit my pry tool easier. I gently pryed little by little around the bottom cover until I could wiggle and pop it off. This may not be the service manual way, but worked for me. Just be careful.
If you're still struggling with it, I could possibly make a vid.