Quote:
Originally Posted by Face
From what I understand, epoxy resins are less prone to clouding compared to polyester resins which are used in cheaper applications.
Clothes dry 20% faster now.  |
lol! that's funny yah, definitely use epoxy but not sure if there are differences between them.
Quote:
Originally Posted by alcheng
Hello guys and gals!!! 
Finally have time to check-in. 
Going to the airport at 7:45am so I have about 6 hours of sleep,
Been to a supplier's HQ today in here, Jacksonville, a very very modern and grand facility they have. Hope it could be a longer trip... but the good is I am going back tomorrow and I can Z again....
Mr.kenchan I'll go for the 50mm f/1.8 or f/1.4 Click Here |
hey mr.alcheng!
hope your trip back is (was) smooth!
thanks on the lens input.
folks have told me 35mm would be better than 50mm for car since i can take shots without backing up via sneaker zoom. i can also get the slight distortion i like to emphasize roundness on some shots, and use for scenic shots as well. not sure.. i will need to think this over more.
Quote:
Originally Posted by bbigby64
I know that I'm way late on this; I'm trying to catch up on all of these threads, but rule of thumb:
1. Speed limit 25 or less, go 5 mph under. These are usually residential rodes with kids.
2. Speed limit 30, go no more than 5 miles over.
3. Speed limit 40 or 50, go no more than 10 mph over.
4. Speed limit 55, go no more than 13 over.
5. Speed limit 65, skies the limit! |
you do realize the other speeds also includes kids in the car...
Quote:
Originally Posted by GaleForce
I'll have to see if my carbon fiber supplier is still open. I haven't fabricated anything with carbon fiber/Kevlar for ~10 years. Sounds like the same stuff is used. Thanks guys |
sounds great. GL with your project, mr.gale!
good morning everyone!