Quote:
Originally Posted by happytheman
Oh, one thing I didn't mention: He let me go. So, even though Hess was kinda being an *** for pulling me over...he didn't ticket me. 
Ordered my 20mm spacers. |
Good to know the cop let you go.
Quote:
Originally Posted by kenchan
i would check online which resins are recommended for CF. since it's black cf it shouldn't matter but dont want it to get cloudy or anything.
 oh man...  hahahaha!!
mr.happy-  on the 20mm. |
Quote:
Originally Posted by Face
From what I understand, epoxy resins are less prone to clouding compared to polyester resins which are used in cheaper applications.
The epoxy resins I've used have held up without a hitch. I bought a few yards of twill weave CF and epoxy resin just to play around with. My first project was a replacement handle for our dryer when the cheap stock handle cracked. A problem I found was common on this particular Kenmore Elite after a little research. (I also found that most home appliance complaints came from women who repeatedly broke their equipment by forcibly opening the doors once they had locked closed, and then subsequently called for class-action lawsuits against the manufacturer.) 
Clothes dry 20% faster now.  |
I'll have to see if my carbon fiber supplier is still open. I haven't fabricated anything with carbon fiber/Kevlar for ~10 years. Sounds like the same stuff is used. Thanks guys