Thread: Polyurethane Exhaust Hangers
View Single Post
Old 05-29-2012, 10:46 PM   #2 (permalink)
Alstann
Track Member
 
Alstann's Avatar
 
Join Date: Oct 2011
Location: South Florida
Posts: 882
Drives: 12 PW 370z 6MT Sport
Rep Power: 15
Alstann is a name known to allAlstann is a name known to allAlstann is a name known to allAlstann is a name known to allAlstann is a name known to allAlstann is a name known to all
Default
Quote:
Originally Posted by biggestsack View Post
I recently went with an Agency Power Exhaust on my 370z and I'm quite happy with it. The only thing I am having an issue with is the pipes touching/resting on the rear cross member.

After some adjustment I was able to get them off of the cross member, but while normally driving it bumps/rattles. I grabbed the rubber hanger and noticed that it had a decent amount of play and by squeezing it together I could get a much better clearance.

I have not used polyurethane and would like to know from those that have what I can expect (if anything) in the cabin while normally driving and at WOT besides it not hitting the cross member . Also does anyone know what size I should go with off the top of their head? I brought the car down unaware there were different sizes
I'm not exactly sure what you are talking about concerning the polyurethane, but a cheap and easy fix for the rubber hangers, you can use a couple zip ties and squeeze the hangers closer so the exhaust can clear the x-member.
__________________
2012 Pearl White 370Z GReddy Twin Turbo
Alstann is offline   Reply With Quote