Nissan 370Z Forum - View Single Post - Using Jack Stand...where to contact point?

slam1918 · 05-27-2012, 12:03 PM

Its easy to drive on the Ryno ramps without removing the front air dam. just cut a piece of 1/2" plywood 9" wide about 2 to 3' long. Stick a 2x4 block under the ply and set them a short way up the ramp. Bada Bing, drive right up your ryno's.

05-27-2012, 12:03 PM	#34 (permalink)
slam1918 Base Member Join Date: Feb 2012 Location: Tequesta, Fl Posts: 60 Drives: 10 370Z White A/T Rep Power: 13	Ryno ramps Its easy to drive on the Ryno ramps without removing the front air dam. just cut a piece of 1/2" plywood 9" wide about 2 to 3' long. Stick a 2x4 block under the ply and set them a short way up the ramp. Bada Bing, drive right up your ryno's.