Quote:
Originally Posted by TonyBPD
could you take a pic of what you did? location etc
|
there's not much room down there. hahaha!
i think it'll go something like this. first put your car in ACC (dont start the engine). make sure you hear the steering lock wind.
i suggest pushing back your driver's seat all the way back, put a towel on your side step/door sill area, and lay completely on the floor with your head in the foot well area.
look up and you will see the steering lock just forward of the OBD2 port. you will then pull back the wire harness tubing and find the wire to cut. i think it stated the brown wire. after you cut, then e-tape it.
DO AT YOUR OWN RISK.