Nissan 370Z Forum - View Single Post

simota1 · 04-29-2012, 08:15 AM

first off... my stupidity.... now i only took a after shot of the spring and not the part of the bushing which i kinked because at the time it occured it was no laughing manner lol... i was pissed beyond belief. the second photo is a pic of the dremel burr i used to grind away as much of the metal i kinked inward....now picture number 3 when the dremel failed because i could no longer maneuver it inward to get more of the blockage out.. i resulted in cave man technique.. i broke a file just so i could file the bushing in and out with the piece i broke off...i spent an hour doing this... i wanted to break that bushing off lol

04-29-2012, 08:15 AM	#1421 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	first off... my stupidity.... now i only took a after shot of the spring and not the part of the bushing which i kinked because at the time it occured it was no laughing manner lol... i was pissed beyond belief. the second photo is a pic of the dremel burr i used to grind away as much of the metal i kinked inward....now picture number 3 when the dremel failed because i could no longer maneuver it inward to get more of the blockage out.. i resulted in cave man technique.. i broke a file just so i could file the bushing in and out with the piece i broke off...i spent an hour doing this... i wanted to break that bushing off lol __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*