From the 2009 manual, page 3-5:
The automatic lock and unlock functions can be deactivated or activated indepen-dently of each other. To deactivate or activate the automatic door lock or unlock system, perform the following procedure:
1. Close all doors.
2. Place the ignition switch in the ON position.
3. Do one of the following within 20 seconds of performing step 2:
. To change AUTO UNLOCK settings: push and hold the power door lock switch to the UNLOCK position for more than 5 seconds.
. To change AUTO LOCK settings: push and hold the power door lock switch to the LOCK position for more than 5 seconds.
4. When activated, the hazard indicator will flash twice. When deactivated, the hazard indicator will flash once.
5. The ignition must be placed in the OFF and ON position again between each setting change.
The 2011 manual says only the automatic unlock function can be disabled, so they may have removed the automatic lock disable, or the 2009 manual may be wrong (I haven't tried it.)
|