Quote:
Originally Posted by ChrisSlicks
With Fritz's fix the "state" signal to the BCM should still exist since that is a passive signal that loops through the lock through the contact closure switches. I don't foresee any BCM/IPDM problems.
The power cut prevents the lock from being able to change state or report any problem. My end goal is to identify the "loop through" signals and make a loop back connector so the lock can be completely disconnected and removed for those that desire.
|
So, we just need to figure out what to do with Wire #111, if anything at all. Wire 97 will need 12v, wire 98 and 106 need 0v. Have you tried that with wire 111 at 0v or even not connected?