Nissan 370Z Forum - View Single Post

Mike · 04-24-2012, 08:28 PM

Haven't updated this thing in a while!

Got the Stillen cooling kit installed today. Went to change brake pads and reinstall my calipers and realized they needed a rebuild, so those parts are now on order and the car will be back on the road Friday.

On the drivers side, I routed the hose just above the firewall, behind the fenderliners.

Used a 2" hole saw to cut a hole in one of the panels behind the liner to smoothly get the hose back to the outside

The right side has stuff on the frame rail and is too close to the exhaust, so it went partially inside the wheel well, then out again. I also relocated my powersteering fluid lines to get them out of the way, but you cant see that here.

04-24-2012, 08:28 PM	#276 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	Haven't updated this thing in a while! Got the Stillen cooling kit installed today. Went to change brake pads and reinstall my calipers and realized they needed a rebuild, so those parts are now on order and the car will be back on the road Friday. On the drivers side, I routed the hose just above the firewall, behind the fenderliners. Used a 2" hole saw to cut a hole in one of the panels behind the liner to smoothly get the hose back to the outside The right side has stuff on the frame rail and is too close to the exhaust, so it went partially inside the wheel well, then out again. I also relocated my powersteering fluid lines to get them out of the way, but you cant see that here. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968