I will do a DIY for this on my next day off. Unfortunately that is not for like a week... It's pretty simple though.
1.) I ordered these:
Trunk Lamps
2.) Cut a hole in the bottom of each door panel for the light to fit into it.
3.) Ran wire through the door jam and connected the positive to constant 12V power, and the negative to the door switch. There is only 1 wire that goes to that switch tap into that wire for the ground.
I will do the complete DIY for this when I get some time and keep you guys posted. I also ordered
These Lights to make them a little bit brighter. Thanks for all your interest and input.