Hey All
I purchased a TI-C exhaust from a fellow member who sold his car and when I recieved the exhaust, the bracket that holds the Evap unit is missing. I would like to fab the unit but need the exact dimension for the following per picture below:
A) Total Length - 22 1/4"
B) Width - 6 7/8"
C) On center bolt hole from edge hole to center hole 10 1/8"
D) width of small bracket 2"
E) On center between mounting bolt - 5 3/4"
Any help is appreciated
Major thanks in advance... Ended up making this
