I didn't have any issues with the dust shield. But you and I run totally different rotor setups. I didn't see a point in the shims either so I tossed them.
The ducting wasn't bad. I ran it at full lock then tucked it in with the ties. I ended up cutting the slack out at the front flanges insted so I could manipulate the hoses in the wheel well until all was complete. But here again I run a 19x9.5 on 265 tire. But stil have lots of clearence.
I flirted with the idea of making a cut in the fender well but decided against. Good thing I could always still do it. It is a tight fit the way Stillen does it but it will be fine being they did all the testing in this location and got the claimed results.
|