View Single Post
Old 03-26-2012, 03:12 PM   #82 (permalink)
silviakid02
Base Member
 
Join Date: Sep 2011
Location: Connecticut
Posts: 79
Drives: 09 MB touring/sport
Rep Power: 14
silviakid02 is on a distinguished road
Default

Was just setting up my car to bring for tints in the morning. I removed the door cards to give them more room to work with and found a trick to help with the install. On the lower door jam is a rubber compression sensor that tells the car if the door is open or closed. If you back out the philips head screw about a half a turn it must break the ground and disable the switch because the window juts up as if the door is closed which will allow them to get deeper below the glass seal on the door to make sure it doesn't peel up. DO NOT forget to tighten the screw so the window drops before you close the door or the glass will smash into the window arch.
silviakid02 is offline   Reply With Quote