Quote:
Originally Posted by ZForce
Minicobra1, do you have a quick recap of your setup and what you finally settled in with for the spacers?
Ichiba spacers:
1) Version 1 or V2 (any particular reason on which version)
2) Stud replacement or bolt on
3) Size Front
4) Size Rear
5) Could you have gone larger?
Eibach Pro Sport Springs
Rear Camber Kit?
New updated pics?
Thanks
Curtis
|
Hey Curtis,
Sorry, haven't been on here in awhile.
1) Version 1, (stud replacement) safer, lighter, plus bolt on style doesn't fit
the front rims b/c the cut outs are not deep enough in the back to clear
the protruding studs.
2) Stud replacement
3) Front 15mm
4) Rear 20mm
5) 20mm will work fine on front, as far as going larger in the rear, 25mm
would work, but I wouldn't recommend it, unless you plan on never going
wider then the stock 275mm tire. If you want to run wider tires I would
stick with the 20mm out back.
These are the latest pics that Berk took , this is after the SPC camber arms on the rear were installed. LINK:
Berk Technology Cat-Back Coming Soon!