Nissan 370Z Forum - View Single Post

joshs09slvrZ · 03-10-2012, 05:40 PM

Just finished installing my sway bars today. Not the most difficult job...but damn those bolts were on there good! I had to hit both the end link bolts and bracket bolts with a few shots of PB blaster just to break them loose!

I set the rear to the stiff setting (hole closest to bar) and the front to the middle setting (middle hole). Took it for a quick test drive and around my neighborhood and the car definitely feels a bit stiffer in cornering. The car doesn't roll as much as the stock bars. My car will never see a track so I may adjust the front to the stiff setting at some point...but I want to drive it more to decide before I get back under there. Also found that the under tray that's supposed to have 4 clips...mine didn't have them. I guess I need to call Nissan and see if they can give me some.

These sway bars, coupled with my 15mm front and 20mm rear spacers, makes this car handle like it should.

03-10-2012, 05:40 PM	#1 (permalink)
joshs09slvrZ Track Member Join Date: May 2010 Location: Spring Hill, FL Posts: 547 Drives: 09 7AT 370Z Rep Power: 16	Stillen Sways Installed!! Just finished installing my sway bars today. Not the most difficult job...but damn those bolts were on there good! I had to hit both the end link bolts and bracket bolts with a few shots of PB blaster just to break them loose! I set the rear to the stiff setting (hole closest to bar) and the front to the middle setting (middle hole). Took it for a quick test drive and around my neighborhood and the car definitely feels a bit stiffer in cornering. The car doesn't roll as much as the stock bars. My car will never see a track so I may adjust the front to the stiff setting at some point...but I want to drive it more to decide before I get back under there. Also found that the under tray that's supposed to have 4 clips...mine didn't have them. I guess I need to call Nissan and see if they can give me some. These sway bars, coupled with my 15mm front and 20mm rear spacers, makes this car handle like it should. __________________ Stillen Gen3 CAI\|Berk HFC and CBE\|UpRev\|15mm H&R front spacers\|20mm Ichiba rear spacers\|Stillen front and rear sway bars\|Yokohama S. Drives\|Swift springs\|JDM Blinking Fog\|8000k HIDs\|9% window tinting, 47% on full windshield